The SVX1 Bodypack Transmitter can be used with the SVX Lavalier or Headworn Wireless system.
SVX1 Bodypack Transmitter
Tech Specs
• Transmitter Type: Bodypack
• Dimensions: 108 mm height X 64 mm width X 19 mm depth
• RF Output Power: 10
• Battery, endurance: 10 h
• Weight: 90 g
CVL Lavalier Condenser Microphone
The Centraverse Lavalier (CVL) offers convenience and performance in an easy-to-use clip-oncardioid condenser microphone that features simple, no-nonsense setup made for presenting professionals. Precision-engineered for years of use in any Shure wireless systems, its compact size is ideal for presenting situations where visibility is a major concern. The unidirectional (cardioid) pickup pattern rejects unwanted sound for superior source quality and vocal reproduction.
Features
• Miniature clip-on lavalier microphone for low visibility
• Permanently charged electret condenser element for clear vocal reproduction
• Unidirectional (cardioid) polar pattern rejects unwanted noise for improved sound quality
• Included tie clip allows for hands-free use, perfect for presenters
• Included windscreen reduces plosives, wind and breath sounds
• Tailored frequency response optimized for speaking and presentations
• TA4F (TQG) connector seamlessly integrates with Shure wireless bodypack systems
• Legendary Shure precision engineering for durability and performanceTech Specs
• Transducer Type : Condenser
• Polar Pattern: Cardioid
• Frequency Response from: 50 Hz
• Frequency Response to: 20 KHz
• Sensitivity (dBV/Pa): -43.5 dBV/Pa
• Weight: 25 gFurther Technical Specs
• Output Impedance: 600 Ω
@ 1 kHz
• Signal-To-Noise Ratio [1]: 72 dB
@ 1 kHz
• Maximum SPL [1]: 139.0 dB
1000 Ω load, @ 1% THD
• Dynamic Range [1]: 117.0 dB
@ 1 kHz, 1000 Ω load
• Equivalent Output Noise [1]: 22 dB
Typical, A-Weighted
• Power Requirements: +5 V DC (nominal), 10 V maximum (DC bias)
• Polarity: Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1
• Cable: 1.3 m (50 in.)
• Connector: TA4F
• Frequency Repsonse Curve:
[1]Measurements taken using RK100PK preamp set @ 0 dB using 8k bias resistor.
* All specifications measured with a 48 VDC phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity.
