The EAW CXT line of ceiling speakers is a cost effective professional set of ceiling speakers that can provide solutions for high quality sound and install friendly features for applications requiring mid-volume music playback and paging.
The EAW CXT600 is a full-range 6.5” coaxial, ported ceiling speaker that provides premium performance and wide dispersion in a simple blind mount installation package. The coaxial design pairs a 6.5” LF and .75” soft dome tweeter for a coherent 110-degree conical dispersion, 96Hz-20kHz response, handling 100W and delivering a 114dB Max-SPL. A 70V/100V multi-tap transformer, with a bypass low-impedance mode, provides a solution for installed distributed music and paging application such as cafes, retail, houses of worship, theater common areas, lounges, hotels, schools and more. Included accessories such as tile rails, C-rings, cut-out templates and paint shields provide everything required for installation.
Configuration
Subsystem
Transducer Loading
LF: 6.5 in. polypropylene woofer Vented
HF: 3/4 in. damped cloth dome tweeter Waveguide
Operating Mode
Amplifier Channels Signal Processing
Single-amp: LF/ HF High Pass filterAcoustical Performance
Operating Range
62 Hz to 20 kHz (-10dB)
Frequency Response
96 Hz to 20 kHz (+/-3dB)
Nominal Beamwidth
110° Conical
Axial Sensitivity (half space SPL)
LF/HF 91 dB
Maximum SPL (@ 1 m)
Average: 108 dB
Peak: 114 dB
Nominal Impedance
8Ω (in bypass mode)
Transformer Taps
70V: 3.8W, 7.5W, 15W, 30W
100V: 7.5W, 15W, 30W
Power Handling
100 W continuous programMechanical
Input Connector
Removable 4-pin screw terminal with loop thru
Materials
Back Can: Zinc-plated Steel
Bezel material: ABSWeight
7.4 lbs/3.4 kgDimensions
Diameter: 9.9 in / 251 mm
Front of Ceiling Tile to Back of Can: 8.8 in / 223 mm
Cutout Size: 8.8 in / 224 mm
Included Accessories
C-ring
Tile Support Rails
Cut-out Template
Paint Shield
Removable Locking Input Connector
Grille
